Hioki LR8450, Instruction Manual

Page: 80 / 310

76
Using the A/B Cursors
5
Select the information to display.
A, B
A cursor measured value, B cursor measured value
A, B−A A cursor measured value, difference in measured values at the B and A cursors (B-A)
B, B−A B cursor measured value, difference in measured values at the B and A cursors (B-A)
A, Comment A cursor measured value, channel comments
B, Comment
B cursor measured value, channel comments
B-A, Comment Difference in measured values at the B and A cursors (B-A), channel comments
6
Select the A/B cursor to move.
Cursor A  Moves only the A cursor.
Cursor B Moves only the B cursor.
Sync Moves the A and B cursors at the same time.
7
Select the channel to display.
You can change the displayed channel by pressing the ENTER key while [<] or [>] is selected.
8
Press the SELECT key to display the Cursor icon.
Each time you press the
SELECT
key, the display will switch between the Cursor icon (A/B cursor
movement) and the Scroll icon (waveform movement).
For more information about the Cursor icon, see “1.11 Observing Waveforms” (p. 60).
9
Press the SCROLL/CURSOR keys to move the A/B cursors.
Key operation

Moves the cursor left a large amount (10 data points at a time).

Moves the cursor right a large amount (10 data points at a time).

Moves the cursor left a small amount (1 data point at a time).

Moves the cursor right a small amount (1 data point at a time).
You can use numerical calculations to calculate values such as the maximum value, minimum
value, and average value for measured waveforms.
See “6.1 Performing Numerical Calculations” (p. 146).