Hioki LR8450, Instruction Manual

Page: 118 / 310

115
Saving Data
Unit Measure Channel Trigger Alarm Calculation System
4
Under [Type] , select [Waveform] .
5
Under [Format] , select the file format.
Binary
 Saves data in the instrument’s dedicated format (binary format).
Text Saves data in text format.
If [Text] is selected, configure the text format settings while [Settings...] is selected.
See [Settings...] of [Text] in “Auto save (real-time save)” (p. 109).
6
Under [Range] , select the range of data to save.
All  Saves the waveform for the entire recorded length, without regard to the A/B cursors.
A-B Saves the waveform between the A and B cursors.
Start-A Saves the waveform from the beginning to the A cursor.
Start-B Saves the waveform from the beginning to the B cursor.
A-End Saves the waveform from the A cursor to the end.
B-End Saves the waveform from the B cursor to the end.
See “Specifying a waveform range” (p. 77).
(When [Format] is set to [Text] )
Under [ Downsampling] , select whether to perform downsampling.
When set to [ON] , the size of the saved data file will be reduced.
OFF

, ON
(When [Downsampling] is set to [ON] )
Under [Decimation factor] , select the decimation factor.
1/2

to 1/100000
Example: If set to [1/5] , 1 data point out of every 5 data points will be left.
7
Press the ENTER key while [Save] is selected.
Waveform data will be saved.
3
Saving and Loading Data