Hioki LR8450, Instruction Manual

Page: 112 / 310

109
Saving Data
Unit Measure Channel Trigger Alarm Calculation System
Under [File splitting] , select the segmentation method (as necessary).
Saved files will be segmented based on the set period of time.
Disable

Creates one waveform file for each measurement. However, files will be segmented
automatically if the file size exceeds 1 GB.
Enable Segments files by the time specified in [Split time] from the start of measurement
when saving waveform data.
Under [Split time] , set the time by which to segment files. However, files will be
segmented automatically if the file size exceeds 1 GB, even if the segmentation time
has not yet been reached.
(When
[File splitting]
is set to
[Enable]
)
Under [Split time] , set the time by which to segment files.
Day ( 0 to 30 ), hour ( 0 to 23 ), min. ( 0 to 59 )
4
Under [Format] in the [Numerical calculation results] area, select the auto save type.
OFF

Does not perform auto-save operation.
Text
Saves data in text format (.CSV).
Under [File splitting] , select whether to segment saved files (as necessary).
Single file

Saves all numerical calculation results in one file.
Individual calc
Creates files segmented by calculation item, in addition to the file containing all of the
calculations together. A calculation number is appended to such folders.
Example: The filename for calculation No. 5 will be AUTO0001_05.CSV
5
Press the ENTER key while [Settings...] under [Text format] is selected.
The settings window will open.
Under [ Decimal symbol] , select the symbol to use as the decimal point.
Period Uses a period (“.”) as the decimal point in numerical values.
Comma Uses a comma (“,”) as the decimal point in numerical values.
Both the [Decimal symbol] and the [Delimiter] settings cannot be set to [Comma] .
When you set either [Decimal symbol ] or [Delimiter] to [Comma] , the other will automatically switch over to
a setting other than [Comma] .
Under [Delimiter] , select the symbol to use as the delimiter.
The file extension will change depending on the delimiter.
Comma Uses a comma (“,”) as the delimiter. (Extension: .CSV)
Space Uses a space character as the delimiter. (Extension: .TXT)
Tab Uses a tab character as the delimiter. (Extension: .TXT)
Semicolon Uses a semicolon (“;”) as the delimiter. (Extension: .TXT)
You cannot set both
[Decimal symbol]
and
[Delimiter]
to
[Comma]
.
3
Saving and Loading Data