Hioki LR8450, Instruction Manual

Page: 69 / 310

65
Observing Waveforms
Unit Measure Channel Trigger Alarm Calculation System
Gage (scale) display
This section describes how to display a gage (scale) for any channel on the left side of the screen.
The gage can be used to check the waveform and its values.
Two gages (A and B) can be displayed.
You can choose the channels for which to display a gage. The gage will be shown in the same color
as the selected channel.
2 2
4 4
3 3
1 1
1
Under [Display] , set the display to [Wave+Set] , [Wave] , or [Wave+Value] .
2
Press the ENTER key while [Gauge] is selected.
The gage window will open.
3
Select the channels for gage A and gage B.
To cancel the settings, press the ESC key.
4
Press the ENTER key while [Close] is selected.
The window will close.
1
Settings and Operation