Hioki LR8450, Instruction Manual

Page: 45 / 310

41
Configuring the Waveform Display
Unit Measure Channel Trigger Alarm Calculation System
2
Under [Display horizontal axis] , select the display format to use for time values (horizontal-
axis values) displayed on the screen.
Time
 Displays the time elapsed since the start of measurement.
When using a trigger, the time elapsed since the trigger activation time will be
displayed.
Date Displays the actual time (date and time) every 10 divisions.
Data points Displays the number of data points since the start of measurement.
When using a trigger, the number of data points from the trigger activation time will be
displayed.
This setting also applies when displaying time values for waveform data saved in the CSV format.
3
Under [Number display format] , select the display format to use for measured values
(vertical-axis values).
Standard

Displays measured values using the same SI prefix as the range.
Example: 0.01234V (when using the 1 V range)
Decimal Displays measured values as decimals.
Example: 0.012V (when the number of decimal places is set to 3)
Exponent Displays measured values as exponents.
Example: 1.234E-02V (when the number of decimal places is set to 3)
Prefix Displays measured values using an SI prefix.
Example: 12.345mV (when the number of decimal places is set to 3)
When setting the horizontal axis on the waveform screen
Under [Horz] , you can select the time per division. This setting can be changed while measurement
is in progress.
1
Settings and Operation