Hioki LR8450, Instruction Manual

Page: 194 / 310

191
Configuring and Establishing a LAN Connection
Unit Measure Channel Trigger Alarm Calculation System
Configuring the computer’s network settings
These settings are configured in the same way, regardless of whether you are connecting the
instrument to one computer or multiple instruments to a single computer via a hub.
This explanation envisions the following network:
• IP address: 192.168.1.0/24 (network address)
or 192.168.1.1 (private IP address*)
• Subnet mask: 255.255.255.0
*: The IP address can be set as desired, but use of a private IP address is recommended.
Windows 7, Windows 8, or Windows 10
1
Under [Control Panel] > [Network and
Sharing Center] > [Change adapter settings ] ,
display the computer’s network connections.
2
Right-click the network adapter icon (with
a name such as [Local area connection] or
[Ethernet] ) and select [Properties] .
3
Select [Internet Protocol Version 4 (TCP/
IPv4)] and click [Properties] .
4
Enter the [IP address] and [Subnet mask]
and click [OK] .
9
Communicating with a Computer (PC)