Hioki LR8450, Instruction Manual

Page: 59 / 310

55
Configuring Channels in a List
Unit Measure Channel Trigger Alarm Calculation System
Copying channel settings
This section describes how to copy one module’s settings to another module.
> > [Unit n] (n = 1, 2, . . .)
2 2
3 3
1 1
1
Press the ENTER key while [Copy...] is selected.
The settings window will open.
2
Select the checkbox for the module to which you wish to copy the settings (the target
module).
The source module cannot be changed from [Un-1] . (n = 1, 2, . . .)
3
Select [OK] and press the ENTER key.
The settings will be copied.
Pressing the ENTER key while [Cancel] is selected to cancel the copy operation.
1
Settings and Operation