Hioki LR8450, Instruction Manual

Page: 62 / 310

58
Checking Input Signals (Monitor Function)
1.9 Checking Input Signals (Monitor Function)
This section describes how to check input waveforms to verify that settings such as the range and
display range have properly been configured before starting measurement.
Press the MONITOR key to display waveforms and values on the monitor screen.
Data will be displayed on the screen but not saved in the instrument’s internal buffer memory or on
storage media.
(1) Setting the time per division
See “Under [Horizontal axis] , select the time per division.” (p. 40).
(2) Selecting the module to display
Waveforms for up to 166 channels can be displayed.
(Maximum number of channels: 120 analog, 8 pulse, 8 alarm, and 30 waveform calculation)
(3) Turning the gage on or off
You can choose the channels for which to display a gage.
(4) Switching the channels to display (for modules with 16 channels or more)
Values can be displayed for up to 15 channels on one screen.
(1) (1) (2) (2) (4) (4) (3) (3)
The monitor function will terminate when you change the screen display or start measurement.
• The monitor function cannot be used while measurement is in progress.
• For channels with more than 14 characters, text will be shown in a smaller size.