Hioki LR8450, Instruction Manual

Page: 29 / 310

25
Configuring Input Channels
Unit Measure Channel Trigger Alarm Calculation System
Measuring humidity
This section describes how to configure settings on the individual settings screen when measuring
humidity with the optional Humidity Sensor.
You can use [Input] on the settings list screen to configure the settings. (See p. 50.)
Applicable modules: U8550, U8551, U8552, LR8531
Applicable sensor: Z2000 Humidity Sensor
> >
3 3
1 1
2 2
1
Select the module (Unit) and channel to configure and select the checkbox.
Measurement will not be performed for channels whose checkboxes are not selected.
2
Select the waveform display color.
× (OFF), 24 colors
Select [×] if you wish to measure the channel but not to display its waveform or numerical values on the
screen.
3
Set the input type to [Humidity] .
There is no range setting (the setting cannot be changed from the 100% RH range).
1
Settings and Operation