3
_____________________________________________________________________________________________
2.1 System Requirements
______________________________________________________________________________________________
NOTE
During data acquisition, transferring large quantities of waveform data from the
MEMORY HiLOGGER requires a corresponding amount of hard disk space.
Available hard disk capacity provided should be sufficient for the expected volume
of data.
Chapter 2
Setup
2.1 System Requirements
Using the 9334 requires the following minimum hardware and software
configuration.
Computer
IBM PC/AT compatible
Pentium 133 MHz (Pentium 200 MHz or more recommended)
64 MB RAM (256 MB RAM recommended)
5 MB of free hard disk space
Operating system
Microsoft Windows XP, Windows Vista, Windows 7 or Windows 8
Internet Explorer 4.01 or later
LAN
Physical LAN installation
Communication using TCP/IP
CD-ROM drive
Used for installation.
Display
Display function capable of 1024 x 768 or higher resolution
Uses a small font. (If you use a large font, it may alter the display.)
To change display settings, open Control Panel by pointing to Settings on
the Start menu. Then, double-click Display and click the Settings tab in
the
Display
dialog box.
