35
_____________________________________________________________________________________________
5.5 Search Functions
______________________________________________________________________________________________
NOTE
You cannot use search functions while measuring in real-time. However, you can
search for them when the waveform display update is temporarily interrupted (refer
to 4.2.1 "Starting Real-Time Data Acquisition").
Copy the display value to the clipboard.
2.
Select the contents to be
displayed.
3.
1.
4. Sets items such as channels and search criteria. (The figure shows how to
search for the maximum measurement.)
If the Cursor screen is displayed, you can display the date of the search
point and the measurements for each channel.
1. Displays the point that was searched.
2. Displays the measurements of each channel of the point searched.
3. Displays the alarm output status of the point that was searched. This
displays green when no alarm is output, and displays red if an alarm is
being output on any of the channels.
