7
_____________________________________________________________________________________________
2.4 LAN Settings
______________________________________________________________________________________________
Of course, if you are assembling a stand-alone network with no connections
to an existing network, you can still obtain the address information from the
administrator, or assign the setup values yourself if there is no administrator.
An IP address within the following range is recommended when setting up a
stand-alone network: 192.168.0.0 to 192.168.255.255.
However, the last number on the right may not be 0 or 255, so we
recommend setting the controller device (such as the PC) to 192.168.0.1, and
setting this instrument to 192.168.0.2.
If several MEMORY HiLOGGERs are connected, the last number should be
incremented by one for each instrument (for example, the next instrument
would be 192.168.0.3). The Host Name should be carefully selected to be
unique among the Host Names assigned to all the other devices.
Otherwise, the following settings should be satisfactory:
Subnet Mask : 255.255.255.0
Default Gateway : OFF
Port Number : 880X
MEMORY HiLOGGER Settings
Carry out the MEMORY HiLOGGER settings in the Settings screen.
For
more on how to display the Settings screen, refer to the MEMORY
HiLOGGER Operating Instructions.
Do not change the settings during a communications session.
Make sure that you enter the host name.
The delimiter and header settings are used for control by communications
commands.
Computer Settings
Using this software requires that the computer have a LAN connection
installed. For details on the LAN settings, consult Windows Help, or the
documentation supplied with your computer's LAN card. The computer must
also have TCP/IP.
