23
_____________________________________________________________________________________________
4.3 Screens During Real-Time Data Acquisition
______________________________________________________________________________________________
4.3.3 Alarm Viewer
Detailed Display
Small Display
1.
5.
2.
3.
4.
The Alarm viewer displays the alarm output status in real-time. However, the
Alarm viewer can only be displayed while data is being loaded. (Valid only
when the 8993 DIGITAL I/O UNIT is connected.)
To display the Alarm viewer, on the [
Screen
] menu, click [
Alarm View
].
You can also click the
toolbar
button displayed on the left.
A new screen is displayed each time you press the button.
You can select from 3 display formats: Detailed Display, Large Display, and
Small Display.
On the [
View
] menu, point to [
Logic View
], then click [
Details
], [
Large
], or
[
Small
].
You can also click the
toolbar
button shown on the left.
From the left, Large Display, Small Display, and Detailed Display are
shown.
1. Displays the current alarm output status in color. When an alarm is output
it displays red, and when no alarm is output it displays green.
2. Displays the current alarm output status in numerical values. When an
alarm is output, "
1
" is displayed, and when no alarm is output, "
0
" is
displayed.
3. Displays the number of times an alarm was output from the start of
measurement until the present.
4. Displays the total time an alarm was output from the start of measurement
until the present.
When the alarm hold is set to On in the "
Alarm Settings
" screen, the
amount of time that elapsed since the alarm was first output until the
present is displayed.
5. Displays the amount of time that has elapsed since measurement started
until the present. Select a display format on the [
View
] menu by pointing
to [
Time Notation
], then clicking [
Absolute
], [
Relative
], [
Sec
], or
[
Sampling No.
] For details on display formats, refer to 5.2.2 "Changing the
Format of the Time Axis."
