11
_____________________________________________________________________________________________
4.1 Preparing for Real-time Data Acquisition
______________________________________________________________________________________________
Chapter 4
Real-time Data Acquisition
4.1 Preparing for Real-time Data Acquisition
Complete the following settings before starting real-time data acquisition:
1. Measurement systems
2. IP addresses of MEMORY HiLOGGERs used for data acquisition
These settings are made in the "
Measurement Settings
" dialog box. On the
menu, click [
Measurement
], then click [
Settings
] to display the
"
Measurement Settings
" dialog box.
The icons for Measurement 1 to Measurement 8 appear in the left box of the
"
Measurement Settings
" dialog box. These icons represent the eight
measurement systems. Up to 16 MEMORY HiLOGGERs are configured in
those systems. Data acquired from the loggers allocated to each system are
stored in the file set for the system. The measurement systems are
independent and data is acquired independently in real-time.
