64
_____________________________________________________________________________________________
9.6 Other
______________________________________________________________________________________________
9.5 Starting/Ending Monitoring by Operating the Logger
9.6 Other
You can control the logger-monitoring program on a logger to start or end
logger monitoring. On page 2 of the logger communications settings, enter
the IP address of the PC, which runs the logger-monitoring program in "
IP
Address
" of [
Monitor Server
] and enter the number set as the "
Listen Port
"
No. (default 9000) of the monitoring program's general settings in "
Port
".
Then turn ON [
Monitor Server
] to start monitoring by the logger-monitoring
program.
Any logger not registered for the logger-monitoring program will be
automatically registered. Turn OFF [
Monitor Server
] to end monitoring.
When an event is received from a logger not selected from the list (i.e.,
when the log of the logger is not displayed), "
Status
" will be displayed in
red to report an event received from that logger. When you select the logger
in red and display its log, the logger's color will revert to the normal color.
