______________________________________________
HARRIS
888-9058-001
WARNING: Disconnect and lockout AC primary power prior to servicing
77
STEP 10:
When all changes are made, press Submit and then press Back to return
to the main menu.
STEP 11:
Select Feature Key on the main menu to get the screen shown in Figure
3-9. The Feature key number is normally entered at the factory before
shipment, but is also recorded in the Factory Test Data included with the
unit. If not already entered, type in the 40 character key to setup the eCDi™
for the correct hardware and features.
STEP 12:
Once the key is entered, click on Submit and then verify that the correct
hardware and features are displayed. Depending on the transmitter type
(chosen by the feature key) you may also need to select the correct type of
exciter for each exciter position. If you change the exciter selection, click on
Submit to finish the Feature Key configuration.
The Feature Key is an encrypted code word that contains all of the hardware configuration,
such as transmitter type and any add on features such as Performance Monitoring. The
Feature Key is coded to the hardware in the eCDi™ and therefore can only be used on a
specific eCDi™ unit.
NOTE:
Other than the exciter selections, the text boxes below the Feature Key box are not
editable and can only be changed with a different Feature Key. If the transmitter
hardware or features purchased do not match the information displayed, contact
technical support.
Figure 3-9 Feature Key Configuration Screen
