NetWave DirectView Broadcast Console Operations & Technical Manual
Revision A
3 - Operation
Harris Broadcast
3-8
PR&E
Figure 3-7. Center Column -
Monitor Control Panel
Monitor Control Panel – Center Column Controls
Figure 3-7 shows the center column controls on a Monitor Control Panel.
Control Room Monitor Source
All control room outputs use the same selected monitor source, which is indicated by the lit
button. Only one button can be selected at a time.
PGM 1-4 — When lit, routes the selected Program bus to the control room outputs.
EXT 1, EXT 2 — When lit, routes the selected External signal to the control room outputs
Displays
VISTAMAX ENABLED — When lit, indicates the console is ready to be networked with a
VistaMax Audio Management System. When not lit, the console is a standalone console with
no networking capability.
CONTROL ROOM MUTE — When lit, indicates the room monitor output and control room
warning logic are active due to one or more channels, that have a control room mic as their
input, are on and assigned to a program bus. When not lit, no channel that has a control
room mic as its source is turned on.
Faders
ROOM MONITOR — 100 mm fader for adjusting the volume of the control room monitor
output. It affects the level of the control room (CR MON) output.
HEAD PHONES — 100 mm fader for adjusting the output volume of the board operator
headphone output (Host HP output) and the headphone jack (1/4" TRS) in the console’s left
side panel.
