56
Chapter
4
•
•
•
•
•
•
Step 1.
Click ROC to open
the Rate of Change
page.
Step 2.
In the ROC Key
field, enter the Key
number provided by
Hardy.
Step 3.
Click Set Parameter.
Wait a few seconds
for the parameter to
be saved in the instrument.
Step 4.
Click the left arrow to reopen the Rate of
Change page.
Step 5.
Select the appropriate Time Measure from
the Time Measure pull-down.
Step 6.
To set the Timebase to use when running
a Rate of Change evaluation, type a value
in the Timebase text field.
Step 7.
Click on the Set Parameter button to set
the entry.
Step 8.
Click the back arrow to return to the HI
4050 Home Page.
ROC Configuration from the Front Panel
See note above about the key requirement.
Step 1.
Once you have a key number, select ROC from the Options menu to display the
ROC menu; then press the down arrow to select ROC Key, and press Enter to
display the ROC Key screen.
Step 2.
Use the left or right arrow to position the cursor and the up or down arrows to
select the values; then press Enter to save the entry. (Note: The displayed number
is not valid.)
Summary of Contents for HI 4050
