Hardy HI 4050, User Manual

Page: 140 / 192

132 Chapter 7
•
•
•
•
•
•
This display with the “><” is an indication that the scale reading as at 0.00 +/- .5 grad.
Pressing the MODE button will change the large number display between GROSS, NET,
And ROC (if enabled) as show here with NET Selected.
Set Points Configuration
About Set Points
Operators may need to reset a set point target weight. For example, if a packaging operation
switches from 10 pound bags to five pound bags, you would change a set point target
weight from ten to five. Target weight is one of several values on the set point web page,
but in most cases, operators will not be asked to change the other values. Instructions for
Configuring the instrument can be found in Chapter 4.
Target
This is the target weight for your application. You may be asked to reset this value if a
production activity changes.