158
Chapter
8
•
•
•
•
•
•
Use the down arrow to
select the option. If an
arrow follows the options,
press Enter to see the
display.
ProgPn# = Program Part
Number. This is the part
number of the firmware. To
see the entire part number,
select ProgPN and press
Enter.
NOTES
The values entered in the Test Menu are for illustration purposes only. Your values will vary.
To download the latest firmware version, visit the Hardy Solutions web page select
Products> Weighing Instruments> Weight Controllers> HI 4050 Single Scale Weight
Controller and then select the Docs & Programs tab. The current firmware with
loading programs and instructions are listed along with other drawings and the latest
manual..
For more extensive information about the Weight Controller and scale operation see
Operation/Diagnostics in the System Integrity Check and Fault Determination from the
Web Page section below.
Parameters
Parameters is the first listed hyper-
link at the base of the Operation-
Diagnostics page. Click that link to
display the Parameters page. Note
the scroll bar on the right of the list.
The steps below explain how you
can duplicate the configuration of
one HI 4050 to use in configuring
another HI 4050 or for sending a
copy of your parameters to
[email protected]
To copy the parameters:
Step 1.
Right click in the
parameter list.
Step 2.
Click Select All.
Step 3.
Right click again.
Step 4.
Click Copy.
Summary of Contents for HI 4050
