Hardy HI 4050, User Manual

Page: 174 / 192

166 Chapter 8
•
•
•
•
•
•
This information is available from the front panel only by Selecting Digital I/O from the
Options menu. See also Configuring the Digital I/O Option Card. For testing the I/O card
outputs , you can toggle the outputs on or off from the Configuration - Options - I/O Card
page. See
I/O Card Configuration.
To return to the Diagnostics page click on the back arrow.
Viewing System C2 Load Sensors
The Sensor 1 and Sensor 2, etc. data on the Web interface Operation/ Diagnostics - Weight
& Voltage IT page may be C2 sensors or non-C2 sensors. To check only the C2-type load
cells, see the Operations - Diagnostic C2 Data page, which tells you how many C2 load
cells are in use and provides the C2 version, Serial Number, Output Resistance, Output
Voltage and Capacity for a selected cell. The Read Sensor button allows you to read this
information for all C2 load sensors in the system. When you press the Read Sensor button,
it receives the information from the first load sensor. The serial number is important if you
need to contact Hardy Process Solutions Technical Support. You do not need an IT
summing box.
Step 1. Click on “C2” at the bottom of the
page to display the C2 Data page
listing the number of C2 load
sensors that are found in the
weighing system.
Step 2. From the Read Data from: pull-
down list, select the C2 load
sensor you want to view.
Our example shows only one C2
load sensor found. If no C2 load
sensors are installed the “C2
Sensors Found” reads 0.
The information on this page is C2
load sensor data only. It does not
refer to any position on the IT
Junction box, nor does it tell you
the operating condition of the load
sensor. To determine the condition
of a load cell and its position, use
Weight and Voltage/IT Test.
Step 3. Click on the back arrow to return
to the Diagnostics page.