Hardy HI 4050, User Manual

Page: 139 / 192

Operation 131
•
•
•
•
•
•
Step 3. To Print Gross, Net, Tare, or All, depending what you configured when setting the
Print parameters, press the Print button.
Using the Onboard Display Menus
After Startup, the display shows that this is a HI 4050+ with the new high speed weigh scale
card in it with the new firmware.
You can use the up and down arrow to scroll through the line options.
These are in order:
1
BLANK
2
BLANK
3
GROSS
4
NET
5
CUSTOM
6
ROC (Rate of Change -- if enabled in the controller)
As you press the up or down arrow, you can scroll through and stop at any two consecutive
lines showing from list.
This shows the selection of Net and CUSTOM. CUSTOM display is a mapped value.
Below, the display of the unit indicates that the Scale connected to the HI 4050 is in motion.