Hardy HI 4050, User Manual

Page: 127 / 192

Mapping 119
•
•
•
•
•
•
Step 3. From the Networks pull- down, select a boolean (yes/no) option as the Source for
the Assignment Statement.
Step 4. In the Word text box, if the default location is not already in use, accept it.
Step 5. Click on the Select button to assign the source to the right side of the assignment
statement. Click the Map button. The new mapping will appears below the Map
text field. This sets the digital output #1 to high/low from the input selected.
NOTE: HI 4050 network input is the source for the data from PLC output. The PLC
can send instructions to the network (input(source) on the HI 4050 and in turn
to the HI 4050 output (destination).