Hardy HI 4050, User Manual

Page: 141 / 192

Operation 133
•
•
•
•
•
•
Entering Set Points from the Web Page
Click Configuration
on the Home Page to
open the Configura-
tion menu, and select
Adjust Setpoint to
open the Adjust
Setpoint page.
Step 1. If your system uses more than one setpoint (up to
four may be used), you will need to know which
one you should change. To select the Setpoint to
configure, use the pull-down list below Help. In
our example we selected Setpoint 1, which appears
in the text field.
Step 2. Select the Mode from the pull-down list. In our
example we selected Gross.
Step 3. From the Type pull down list, select the Type of
control you want for your application. In our
example we selected “Loss in Weight.”
Step 4. Enter the Target weight for your application in the
Target field. Our example shows 180.0 lbs.
Step 5. In the Preact text field, enter the Preact value for
your application. Our example uses 5.00 lbs.
Step 6. In the Deadband field, enter the value for your
application. Set points deactivate at the set point
plus the deadband. Set the deadband larger than the
preact to prevent rapidly fluctuating setpoint
states. In our example we entered 8.00 lbs.
Step 7. Click Save Parameters to save the Setpoint
parameters.