Happy HCS2-1201-30, Maintenance Manual

Page: 91 / 196

92
3-6-5 Adjustment of thread cut timing
(except for Rev.A)
1. Remove bobbin winder and power supply.
2. Loosen screw on thread cut cam.
3. Set dial disc to [ 116 degrees ].
4. Turn thread cut cam clock-wise while pushing
release lever down.
<Important> Push thread cut cam against rotary hook
shaft collar A so as not to produce clearance
between cam and collar .
5. Tighten screw on thread cut cam when moving knife began
to open.