Happy HCS2-1201-30, Maintenance Manual

Page: 18 / 196

19
3-1-1 Maintenance of thread path
In a bid to prevent poor sewing finish or thread break, please keep places where thread contacts in the best condition.
1. Thread tension, detecting roller
a) Revolution must be smooth
b) No sticking of lint or dust
2. Holes on thread guide plate
a) No burr and crack
3. Ceramic and rim of take-up lever
a) No burr and crack
4. Thread path in lower side and needle holder.
a) No burr and crack
5. Needle
a) Needle tip shouldn't be warped or bent.
When you slide needle tip on surface of nail and
if the nail gets scratched.
needle tip is warped. Please exchange it with new one.
Please place needle on flat surface and check
clearance (A) from side.
If clearance is not equal, needle is bent.
Please replace it with new one.