Happy HCS2-1201-30, Maintenance Manual

Page: 141 / 196

14 3
4-5 Maintenance mode
Maintenance mode consists of items as shown below.
Machine Test Movement test, maintenance, and adjustment
Machine Setting Machine control setting
Memory All Clear Initialization of design memory.
Main Program Update Update of operation program and language data
Machine Program Update
Update of control program and frame move data
Frame Position Entry Registration of coordinates for positioning sensor
(Not used in HCS2)
Record Total number of stitches, Error occurrence record, Occurrence record by error type.
Maintenance Register Registration of machine maintenance date(Normally not used at maintenance)
Other
Other (This item is neither configured nor used.)
License Registration Limited usable period
Replaced CONT Board
Machine Setting Navigation after exchanging CONT board (Main program Ver.*1.34~)
4-5-1 How to enter maintenance mode
1. Turn on machine.
3. Press NEXT while pressing START/STOP button
at the screen of the control box after booting the
machine.
Main program Ver.*1.34~
4. Change to booting screen when you press
.
You can enter maintenance mode again by long key
press
of (Menu) at the Drive screen after
maintenance mode is finished.
However, you cannot use the reentry method above
once
the machine is turned off and rebooted.