Happy HCS2-1201-30, Maintenance Manual

Page: 57 / 196

5 8
3-3-3 Assemble the moving head
1. Please confirm that the position of needle bar change
unit is set at 12 th needle.
2. moving head
を
12th needles
の位置で、
Install moving head
tentatively.
<Caution>
Screw head not to come out from LM guide side.
3. Put in SIMM [0.05mm] between a moving head and
LM guide.
* Don't tighten a screw only by inserting SIMM here.
Please give
<Caution> Do not lost simm material.
<View of behind>
Position which SIMM puts in screws
Moving head (central position between)
LM guide SIMM (Right)
<View of right side>
Moving head
Front
LM guide SIMM (Three places)
Position (it puts in to the back) which SIMM puts in