H3C MSR810, Command Reference Manual

Page: 381 / 389

369
Default
The maximum number of retries is 2.
Views
Frame Relay interface view
Predefined user roles
network-admin
Parameters
retries
: Specifies the maximum number of retries, in the range 1 to 5.
Usage guidelines
A bundle link maintains link status by periodically sending hello messages to its peer end. If the
bundle link sends a hello message but does not receive a hello acknowledgement, it will resend the
hello message. If the bundle link still receives no acknowledgements after the maximum number of
retries is reached, the system determines that the line protocol on the bundle link is down.
Before configuring this command, make sure you have used the
link-protocol mfr
command to
enable MFR encapsulation on the Frame Relay interface.
Examples
# Set the maximum number of retries to 3 for interface Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] link-protocol mfr
[Sysname-Serial2/1/0] mfr retry 3
Related commands
link-protocol mfr
mfr timer ack
mfr timer hello
mfr timer ack
Use
mfr timer ack
to set the amount of time that a bundle link waits for a hello acknowledgment
before resending the hello message.
Use
undo mfr timer ack
to restore the default.
Syntax
mfr timer ack seconds
undo mfr timer ack
Default
The wait time for a hello acknowledgment is 4 seconds.
Views
Frame Relay interface view
Predefined user roles
network-admin
Parameters
seconds
: Specifies the wait time in the range 1 to 10 seconds.