H3C MSR810, Command Reference Manual

Page: 339 / 389

327
dlci dlci-number
: Specifies a VC by its DLCI in the range of 16 to 1007.
• If you specify a main interface and a VC that is not on the main interface or any of its
subinterfaces, this command does not display IPv6 address mapping for the VC.
• If you specify a subinterface and a VC that is not on the subinterface, this command does not
display IPv6 address mapping for the VC.
• If you specify only an interface, this command displays IPv6 address mapping for all VCs on the
interface.
Usage guidelines
If you do not specify the
static
or
dynamic
keyword, this command displays both static and dynamic
address mapping.
Examples
# Display Frame Relay IPv6 address mapping.
<Sysname> display fr ipv6 map
Map statistics for interface Serial2/1/0 (DTE)
DLCI: 100 IPv6 IND: FE80::56FF:FE00:0 Interface: Serial2/1/0
Create time: 2014/10/11 09:57:28 Status: Active
Encapsulation: IETF Broadcast
DLCI: 100 IPv6 IND: 10::1 Interface: Serial2/1/0
Create time: 2014/10/11 09:57:28 Status: Active
Encapsulation: IETF Broadcast
DLCI: 100 IPv6: 10::3 Interface: Serial2/1/0
Create time: 2014/10/11 09:57:28 Status: Active
Encapsulation: IETF Broadcast
Table 63 Command output
Field Description
Map Statistics for interface Serial2/1/0 (DTE)
IPv6 address-to-DLCI maps for Serial 2/1/0 (a DTE
interface).
DLCI: 100 VC identified by the DLCI number.
IPv6 IND 10::1
Address map established with the peer IPv6 address
10::1 through IND.
If IND is absent, the address map is manually
configured.
Interface: Serial2/1/0 Interface where the VC was created.
Create time: 2014/10/11 09:57:28 Time when the address map was created.
Status: Active Status of the address map: Active or Inactive.
Encapsulation: IETF Encapsulation type for the VC: IETF or Nonstandard.
Broadcast Broadcast packets are allowed on the VC.
display fr lmi
Use
display fr lmi
to display LMI information.
Syntax
display fr lmi
[
interface interface-type interface-number
]