H3C MSR810, Command Reference Manual, Page: 55 / 389

43
Current state: DOWN
Line protocol state: DOWN
Description: Virtual-Template1 Interface
Bandwidth: 100000kbps
Maximum transmission unit: 1500
Hold timer: 10 seconds, retry times: 5
Internet address: 192.168.1.200/24 (primary)
Link layer protocol: PPP
LCP: initial
Physical: None, baudrate: 100000000 bps
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
# Display brief information about Virtual-Template 1.
<Sysname> display interface virtual-template 1 brief
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Primary IP Description
VT1 DOWN DOWN --
# Display brief information about the VT interfaces in physically down state and the causes.
<Sysname> display interface Virtual-Template brief down
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
VT0 DOWN Not connected
VT12 DOWN Not connected
VT1023 DOWN Not connected
Table 8 Command output
Field Description
Current state
Physical state of the interface. This field for a VT interface can only
be
DOWN
.
Line protocol state
Data link layer state. This field for a VT interface can only
be
DOWN
.
Description Interface description.
Bandwidth Expected bandwidth of the interface.
Hold timer Interval at which the interface sends keepalive packets.
retry times
Keepalive retry limit.
The interface determines that its peer has been down if it does not
receive a keepalive response when the keepalive retry limit is
reached.
Internet protocol processing: Disabled The interface cannot process IP packets currently.
Internet address: 192.168.1.200/24
(primary)
Primary IP address of the interface.
LCP initial LCP initialization is complete.