291
Default
Calls from all ISDN calling numbers are accepted, and callback is not initiated.
Views
Dialup interface view
Predefined user roles
network-admin
Parameters
remote-number
:
Specifies an
ISDN calling number, a case-insensitive string of 1 to 30 characters.
The asterisk (*) is allowed as a wildcard that matches any character.
callback
: Enables callback for the specified ISDN calling number.
Usage guidelines
A dialup interface screens an i ncoming call by comparing the calling number with the numbers
configured in the
dialer call-in
command. If the remote SPCS does not provide the calling number,
the call is dropped directly.
On a dialup interface configured with the
dialer call-in
callback
command, you must configure the
dialer route
or
dialer number
command. The
dial-number
configured in the
dialer route
or
dialer
number
command must be the same as the
remote-number
configured in the
dialer call-in
callback
command.
Examples
# Configure BRI 2/4/0 to place return calls for ISDN calling number
8810152
.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] dialer route ip 100.1.1.2 8810152
[Sysname-Bri2/4/0] dialer call-in 8810152 callback
Related commands
dialer callback-center
dialer circular enable
Use
dialer circular enable
to enable traditional DDR on a dialup interface.
Use
undo circular bundle enable
to disable traditional DDR on a dialup interface.
Syntax
dialer circular enable
undo dialer circular enable
Default
Traditional DDR is disabled on a dialup interface.
Views
Dialup interface view
Predefined user roles
network-admin
Usage guidelines
DDR includes traditional DDR and bundle DDR.
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
