H3C MSR810, Command Reference Manual

Page: 158 / 389

146
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
HDLC-B2 ADM Administratively
Table 24 Command output
Field Description
Current state
Physical state and administrative state of the HDLC link bundle
interface:
•
DOWN (Administratively)
—The interface is shut down by using
the
shutdown
command (the interface is administratively down).
•
DOWN
—The interface is administratively up but physically down.
•
UP
—The interface is up both administratively and physically.
Line protocol state
Link layer protocol state of the HDLC link bundle interface:
•
DOWN
—The link layer protocol of the interface is down, typically
because the HDLC link bundle interface does not have any
Selected interface.
•
UP
—The link layer protocol of the interface is up.
Description Description of the HDLC link bundle interface.
Bandwidth Expected bandwidth of the HDLC link bundle interface.
Maximum Transmit Unit MTU on the HDLC link bundle interface.
Hold timer
Keepalive transmission interval of the interface.
This field is ineffective for an HDLC link bundle interface because an
HDLC link bundle interface does not transmit keepalives.
Retry times
Keepalive retry limit.
This field is ineffective for an HDLC link bundle interface because an
HDLC link bundle interface does not transmit keepalives.
Internet Address is 1.1.1.2/24
Primary
IP address of the HDLC link bundle interface.
If no IP address is configured for the interface, this field is replaced
with
Internet protocol processing: disabled
.
Link layer protocol Link layer protocol encapsulation on the HDLC link bundle interface.
Physical Physical type of the HDLC link bundle interface.
Baudrate Baudrate of the HDLC link bundle interface.
Output queue - Urgent queuing:
Size/Length/Discards 0/100/0
Output queue - Protocol queuing:
Size/Length/Discards 0/500/0
Output queue - FIFO queuing:
Size/Length/Discards 0/75/0
Traffic statistics for each output queue on the HDLC link bundle
interface, including:
• The number of packets in the queue (the queue size).
• The maximum number of packets that the queue can hold (queue
length).
• The number of dropped packets.
The output queues on the HDLC link bundle interface include the
following types:
• Urgent queue.
• Protocol queue.
• FIFO queue.
Last clearing of counters
Time when the
reset counters interface
command was last used to
clear the interface statistics. This field displays
Never
if the
reset
counters interface
command has never been used on the interface
since device startup.