9
Received:
Compressed/Error/Total: 0/0/0 packets
Sent:
Compressed/Total: 0/0 packets
Sent/Saved/Total: 0/0/0 bytes
Packet-based compression ratio: 0%
Byte-based compression ratio: 0%
Connections:
Rx/Tx: 16/16
Five-Minute-Miss: 0 (Misses/5Mins)
Max-Miss: 0
Table 4 Command output
Field
Description
Received:
Compressed/Error/Total
Statistics for received packets:
•
Compressed
—Number of compressed packets.
•
Error
—Number of error packets.
•
Total
—Total number of received packets.
Sent:
Compressed/Total
Sent/Saved/Total
Packet-based compression ratio
Byte-based compression ratio
Statistics for sent packets:
•
Compressed
—Number of compressed packets.
•
Total
—Total number of sent packets.
•
Sent
—Bytes of sent packets.
•
Saved
—Bytes of saved packets.
•
Total
—Total bytes to be sent if packets are not compressed.
•
Packet-based compression ratio
—Ratio of compressed
packets to the total sent packets.
•
Byte-based compression ratio
—Ratio of saved bytes to the
total sent bytes.
Connections:
Rx/Tx
Five-Minute-Miss
Max-Miss
Number of connections.
•
Rx
—Number of connections that the receiver can decompress.
•
Tx
—Number of connections that the sender can compress.
•
Five-Minute-Miss
—Number of search failures within the last 5
minutes.
•
Max-Miss
—Maximum number of search failures within 5
minutes.
Related commands
ppp compression iphc enable
reset ppp compression iphc
ip address ppp-negotiate
Use
ip address ppp-negotiate
to enable IP address negotiation on an interface, so that the
interface can accept the IP address allocated by the server.
Use
undo ip address ppp-negotiate
to restore the default.
Syntax
ip address ppp-negotiate
undo ip address ppp-negotiate
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...