H3C MSR810, Command Reference Manual

Page: 239 / 389

227
Parameters
output-pcr
: Specifies the peak output rate of ATM cells in kbps. For more information about the value
range, see Table 47 .
output-scr
: Specifies the sustainable output rate of ATM cells in kbps. Its value ranges are the same
as those of the
output-pcr
argument, and i ts value is equal to or smaller than the value of
the
output-pcr
argument.
output-mbs
: Specifies the maximum burst size of ATM cells (maximum number of ATM cells that the
output interface can cache). The value range for this argument is 1 to 512.
Usage guidelines
You can use this command as well as the
service cbr
,
service ubr
, and
service vbr-nrt
commands
to set the service type and parameters of a PVC. If you execute this command multiple times, the
most recent configuration takes effect.
Examples
# Create a PVC named
aa
on the interface ATM 2/4/0, and set the VPI/VCI, service
type,
output-pcr
,
output-scr
, and
output-mbs
to 1/101, VBR-RT, 100000, 50000, and 320,
respectively.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc aa 1/101
[Sysname-ATM2/4/0-pvc-aa-1/101] service vbr-rt 100000 50000 320
# Create a PVC named
aa
in PVC-group 1, and set the VPI/VCI, service type,
output-pcr
,
output-scr
,
and
output-mbs
to 1/101, VBR-RT, 100000, 50000, and 320, respectively.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc-group 1
[Sysname-ATM2/4/0-pvc-group-1] pvc aa 1/101
[Sysname-ATM2/4/0-pvc-group-1-pvc-aa-1/101] service vbr-rt 100000 50000 320
Related commands
service cbr
service ubr
service vbr-nrt
shutdown
Use
shutdown
to shut down an interface.
Use
undo shutdown
to bring up an interface.
Syntax
shutdown
undo shutdown
Default
An interface is up.
Views
VE interface view
VE subinterface view