139
[Sysname] interface hdlc-bundle 1
[Sysname-HDLC-bundle1] bundle load-balance per-flow
bundle max-active links
Use
bundle max-active links
to set the maximum number of Selected interfaces allowed in an
HDLC link bundle.
Use
undo bundle max-active links
to restore the default.
Syntax
bundle max-active links number
undo bundle max-active links
Default
The maximum number of Selected interfaces allowed in an H DLC link bundle is the maximum
number of Selected interfaces supported by the device.
Views
HDLC link bundle interface view
Predefined user roles
network-admin
Parameters
number
: Specifies the maximum number of Selected interfaces allowed in an HDLC link bundle. The
value range for this argument is 1 to 16.
Usage guidelines
The value specified by using this command cannot be smaller than the value specified by using
the
bundle min-active links
command.
Use the
bundle max-active links
command together with the
bundle member-priority
command
to make sure both ends of a link always have the same Selected status. The communication fails
when one end is Selected but the other end is Unselected.
Examples
# Set the maximum number of Selected interfaces allowed in HDLC link bundle 1 to 8.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-HDLC-bundle1] bundle max-active links 8
Related commands
bundle member-priority
bundle min-active links
bundle member-priority
Use
bundle member-priority
to set the bundling priority value for an HDLC-enabled interface.
Use
undo bundle member-priority
to restore the default.
Syntax
bundle member-priority priority
undo bundle member-priority
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
