H3C MSR810, Command Reference Manual

Page: 279 / 389

267
wcdma band
profile create
Use
profile create
to create a profile for a 3G modem.
Syntax
profile create profile-number
{
dynamic
|
static apn
}
authentication-mode
{
none
| {
chap
|
pap
}
user username
[
password password
] }
Default
The default setting for this command depends on the 3G modem model.
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
profile-number
: Specifies a profile number. The value range varies by modem model.
dynamic
: Uses an access point automatically assigned by the service provider.
static apn
: Specifies the access point provided by the service provider. It is a string of 1 to 100
characters. Whether the string is case-sensitive varies by service provider.
authentication-mode
: Specifies the authentication mode, which can be
none
,
pap
, or
chap
.
none
: Performs no authentication.
chap
: Specifies CHAP authentication.
pap
: Specifies PAP authentication.
user username
: Specifies the username provided by the service provider. It is a case-sensitive string
of 1 to 32 characters.
password password
: Specifies the authentication password provided by the service provider. It is a
case-sensitive string of 1 to 32 characters.
Usage guidelines
If you specify
chap
or
pap,
make sure the authentication settings are identical to those assigned by
the service provider.
Examples
# Create a profile for Cellular 2/4/0. Specify the profile number as 1 and the access point name as
cmnet
, and specify the PAP authentication mode.
<Sysname> system-view
[Sysname] controller cellular 2/4/0
[Sysname-Cellular2/4/0] profile create 1 static cmnet authentication-mode pap user abc
password abc
Related commands
display cellular
profile delete