300
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] dialer timer autodial 60
Related commands
dialer number
dialer route
dialer timer compete
Use
dialer timer compete
to set the compete-idle timer.
Use
undo dialer timer compete
to restore the default.
Syntax
dialer timer compete compete-idle
undo dialer timer compete
Default
The compete-idle timer is 20 seconds.
Views
Dialup interface view
Predefined user roles
network-admin
Parameters
compete-idle
:
Specifies the idle time when contention occurs, in the range of 0 to 65535 seconds.
Usage guidelines
The idle-timeout timer starts when a link is established. If all physical interfaces are in use when DDR
places a new call, contention occurs. DDR starts the compete-idle timer to replace the idle-timeout
timer. When the compete-idle timer expires, DDR disconnects the idle links.
Examples
# Set the compete-idle timer to 10 seconds on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] dialer timer compete 10
dialer timer enable
Use
dialer timer enable
to set the link holddown timer.
Use
undo dialer timer enable
to restore the default.
Syntax
dialer timer enable
interval
undo dialer timer enable
Default
The link holddown timer is 5 seconds.
Views
Dialup interface view
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
