H3C MSR810, Command Reference Manual

Page: 25 / 389

13
Table 5 Default nas-port-type attribute
Service type Link type Nas-port-type attribute
PPPoE
Layer 3 virtual Ethernet interface
xdsl
Other interfaces
ethernet
PPPoA Any
xdsl
L2TP Any
virtual
Views
VT interface view
Predefined user roles
network-admin
Parameters
802.11
: Specifies IEEE 802.11. The code value is 19.
adsl-cap
: Specifies asymmetric DSL, Carrierless Amplitude Phase. The code value is 12.
adsl-dmt
: Specifies asymmetric DSL, Discrete Multi-Tone. The code value is 13.
async
: Specifies async. The code value is 0.
cable
: Specifies cable. The code value is 17.
ethernet
: Specifies Ethernet. The code value is 15.
g.3-fax
: Specifies G.3 Fax. The code value is 10.
hdlc
: Specifies HDLC Clear Channel. The code value is 7.
idsl
: Specifies ISDN Digital Subscriber Line. The code value is 14.
isdn-async-v110
: Specifies ISDN Async V.110. The code value is 4.
isdn-async-v120
: Specifies ISDN Async V.120. The code value is 3.
isdn-sync
: Specifies ISDN Sync. The code value is 2.
piafs
: Specifies PHS Internet Access Forum Standard. The code value is 6.
sdsl
: Specifies symmetric DSL. The code value is 11.
sync
: Specifies sync. The code value is 1.
virtual
: Specifies virtual. The code value is 5.
wireless-other
: Specifies wireless–other. The code value is 18.
x.25
: Specifies X.25. The code value is 8.
x.75
: Specifies X.75. The code value is 9.
xdsl
: Specifies Digital Subscriber Line of unknown type. The code value is 16.
Usage guidelines
The nas-port-type attribute is used for RADIUS authentication and accounting. For more information
about the nas-port-type attribute, see RFC 2865.
Examples
# Set the nas-port-type attribute to
sync
for Virtual-Template 1.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] nas-port-type sync