H3C MSR810, Command Reference Manual

Page: 353 / 389

341
Examples
# Set the InARP request interval during an InARP learning process to 15 seconds on the Frame
Relay interface Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] fr inarp interval 15
Related commands
display fr inarp
fr inarp
fr interface-type
Use
fr interface-type
to set the type of a Frame Relay interface.
Use
undo fr interface-type
to restore the default.
Syntax
fr interface-type
{
dce
|
dte
}
undo fr interface-type
Default
The type of a Frame Relay interface is DTE.
Views
Interface view
Predefined user roles
network-admin
Parameters
dce
: Specifies DCE.
dte
: Specifies DTE.
Examples
# Set the type of the Frame Relay interface Serial 2/1/0 to DCE.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] fr interface-type dce
fr ipv6 ind
Use
fr ipv6 ind
to enable IND for dynamic address mapping on a Frame Relay interface.
Use
undo fr ipv6 ind
to disable IND for dynamic address mapping on a Frame Relay interface.
Syntax
fr ipv6 ind
[
dlci-number
]
undo fr ipv6 ind
[
dlci-number
]
Default
IND is disabled on a Frame Relay interface.