H3C MSR810, Command Reference Manual

Page: 22 / 389

10
Default
IP address negotiation is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
If you execute the
ip address ppp-negotiate
and
ip address
commands multiple times, the most
recent configuration takes effect.
Examples
# Enable IP address negotiation on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ip address ppp-negotiate
Related commands
ip address
(
Layer 3—IP Services Command Reference
)
remote address
ip pool
Use
ip pool
to configure a PPP address pool.
Use
undo ip pool
to remove a PPP address pool or an IP address range of the PPP address pool.
Syntax
ip pool pool-name start-ip-address
[
end-ip-address
] [
group group-name
]
undo ip pool pool-name
[
start-ip-address
[
end-ip-address
] ]
Default
No PPP address pool is configured.
Views
System view
Predefined user roles
network-admin
Parameters
pool-name
: Specifies a name for the PPP address pool to be created, a case-sensitive string of 1 to
31 characters.
start-ip-address
[
end-ip-address
]: Specifies an IP address range. If you do not specify
the
end-ip-address
argument, the PPP address pool has only the start IP address.
group group-name
: Specifies a group by its name to which the PPP address pool belongs. The
group name is a case-sensitive string of 1 to 31 characters. If you do not specify this option, the
group name is
default
(the default group).
Usage guidelines
The system supports multiple address spaces that each correspond to a VPN instance. The same IP
addresses can exist in different address spaces.