H3C MSR810, Command Reference Manual

Page: 110 / 389

98
Parameters
bandwidth-value
: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see
Layer 3—IP Routing Configuration Guide
.
Examples
# Set the expected bandwidth of Virtual-PPP 10 to 100 kbps.
<Sysname> system-view
[Sysname] interface virtual-ppp 10
[Sysname-Virtual-PPP10] bandwidth 100
default
Use
default
to restore the default settings for a virtual PPP interface.
Syntax
default
Views
Virtual PPP interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The
default
command might interrupt ongoing network services. Make sure you are fully aware of
the impact of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies or system restrictions. Use the
display this
command in interface view to
identify these commands. Use the
undo
forms of these commands or follow the command reference
to individually restore their default settings. If your restoration attempt still fails, follow the error
message instructions to resolve the problem.
Examples
# Restore the default settings for Virtual-PPP 10.
<Sysname> system-view
[Sysname] interface virtual-ppp 10
[Sysname-Virtual-PPP10] default
description
Use
description
to set the description for a virtual PPP interface.
Use
undo description
to restore the default.
Syntax
description text
undo description