H3C MSR810, Command Reference Manual

Page: 369 / 389

357
Table 67 Command output
Field Description
Current state
Physical state and administrative state of the MFR interface:
•
Administratively DOWN
—The interface has been shut down by
using the
shutdown
command.
•
DOWN
—The interface is administratively up, but its physical state
is down (possibly because no physical link exists or the link has
failed).
•
UP
—The interface is both administratively and physically up.
Line protocol state
Data link layer state of the interface:
•
UP
—The data link layer protocol is up.
•
DOWN
—The data link layer protocol is down.
Description Description of the MFR interface.
Bandwidth Expected bandwidth of the MFR interface.
Maximum Transmit Unit MTU of the MFR interface.
Hold timer Interval for the MFR interface to send keepalive messages.
retry times Number of times that the interface sends a keepalive message.
Internet protocol processing
IP packet processing capability:
•
Enabled—
The MFR interface can process IP packets.
•
Disabled—
The MFR interface cannot process IP packets.
Link layer protocol is FR
IETF
Encapsulation type of the MFR interface:
• IETF.
• Nonstandard.
LMI DLCI is 0, LMI type is
Q.933a, Frame Relay DTE
DLCI number used by LMI, LMI type, and port type.
Q.933a LMI and ANSI LMI use DLCI 0, and nonstandard LMI uses DLCI
1023.
LMI status enquiry sent 0, LMI
status received 0
Number of sent status enquiry messages and number of received status
messages.
LMI status timeout 0, LMI
message discarded 0
Number of status messages that timed out and number of discarded
messages.
Physical Physical type of the interface.
Output queue - Urgent queuing:
Size/Length/Discards 0/100/0
Output queue - Protocol queuing:
Size/Length/Discards 0/500/0
Output queue - FIFO queuing:
Size/Length/Discards 0/75/0
Statistics on the packets of the following interface output queues:
• Urgent queue.
• Protocol queue.
• FIFO queue.
Last clearing of counters: Never
Time when the interface statistics were last cleared.
Never
indicates that the interface statistics have never been cleared
since device startup.
Last 300 seconds input rate: 0
bytes/sec, 0 bits/sec, 0
packets/sec
Last 300 seconds output rate: 0
bytes/sec, 0 bits/sec, 0
packets/sec
Average input rate of the MFR interface in the last 5 minutes.
Average output rate of the MFR interface in the last 5 minutes.