119
Use
undo ppp user attach-format
to restore the default.
Syntax
ppp user attach-format imsi-sn split splitchart
undo ppp user attach-format
Default
No separator is configured for the sent authentication information.
Views
Interface view
Predefined user roles
network-admin
Parameters
splitchart
: Specifies the separator. The separator contains one character, and it can be a letter, digit,
or sign such as the percent sign (%), pound sign (#), and at sign (@).
Usage guidelines
By default, the authentication information contains only the client username. If you include the IMSI
or SN information in the authentication information, you must configure the separator to separate
different types of information. For example, if you specify the at sign (@) as the separator,
authentication information will be sent in the format of
imsiinfo@sninfo@username
.
Examples
# Configure the pound sign (#) as the separator for the sent authentication information on the client.
<Sysname> system-view
[Sysname] interface serial 2/1/0:0
[Sysname-Serial2/1/0:0] ppp user attach-format imsi-sn split #
# Configure the pound sign (#) as the separator for the sent authentication information on the LAC.
<Sysname> system-view
[Sysname] interface virtual-ppp 1
[Sysname-Virtual-PPP1] ppp user attach-format imsi-sn split #
Related commands
ppp user accept-format imsi-sn split
ppp user replace
ppp user replace
Use
ppp user replace
to replace the client username with the IMSI or SN information for
authentication.
Use
undo ppp user replace
to restore the default.
Syntax
ppp user replace
{
imsi
|
sn
}
undo ppp user replace
Default
The client username is used for authentication.
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
