GK600E User Manual
Chapter 6 List of Parameters
- 83 -
Parameter
Designation
Scope
Factory
default
Attr
option board)
not inclusive)
22: External fault input
23: Fault reset (RESET)
24: Pulse input (valid only for X6/DI)
25: Motor 1/2 sw itchover
26: Reserved
27: Run command sw itched to control
panel control
28: Run command sw itched to
terminal control
29: Run command sw itched to
communication control
30: Frequency set mode shift
31: Master FREQ set sw itched to
digital setting b0-02
32: Auxiliary FREQ set sw itched to
digital setting b0-04
33: PID adjustment direction
34: PID paused
35: PID integration paused
36: PID parameter sw itch
37: Count input
38: Count clear
39: Length count
40: Length clear
41~62: Reserved
63: Simple PLC paused
64: Simple PLC disabled
65: Simple PLC stop memory clear
66: Start w obble frequency
67: Clear w obble frequency status
68: Run prohibited
69: DC brake in run
70: Analog input curve sw itching
71: Motor run enabled
71~99: Reserved
C0-11
Filtering time of digital input
terminal
0.000s~1.000s
0.010s
△
C0-12
Delay time of terminal X1 0.0s~3600.0s
0.0s
△
C0-13
Delay time of terminal X2 0.0s~3600.0s
0.0s
△
C0-14
Digital input terminal
enabled status setting 1
Ones place: X1
0: Positive logic
0000
×
