Chapter 4 Operation and Run Instructions GK600E User Manual
- 50 -
2) Press
to display parameter value 0000 that belongs to A0-00;
3) Press
for six times to change the rightmost digit "0" to "6";
4) Press
to move the flashing digit to the leftmost bit;
5) Press
once to change "0" in leftmost bit to "1";
6) Press
to save the value of A0-00, then Control panel w ill sw itch to display the
next parameter A0-01;
7) Press
to change A0-01 to A0-00;
8) Repeat steps 2) till 6). A0-01 w ill be displayed after control panel displaying P-SEt;
9) There are three methods for users to bring the passw ord setting above into effect:
①
Press
+
+
simultaneously (PrtCt displayed),
②
w on’t
operate control panel w ithin 5 minutes,
③
restart the drive.
Flow chart of user password setting:
Fig. 4-11 Flow chart of user password setting
ATTENTION:
User's passw ord is successfully set w hen step 8 finished, but w ill not take effect until the
completion of step 9.
Password authentication
In non-parameter edit status, press
to enter first-tier display A0-00, then press
to enter second-tier display 0.0.0.0. Control panel w ill implement the display of
other parameters only w hen correct password entered.
Clear password
After successful passw ord authentication, it w ill access passw ord setting code A0-00.
Passw ord can be cleared by w riting value 0000 into A0-00 tw ice.
放弃修改
50.00
50.00
0.0.0.
6
0.0.0.
0
A0-00
50.00
ENT
ENT
▲
>>
0
.0.0.6
1
.0.0.6
A0-0
1
A0-00
ENT
▲
▼
ENT
0.0.0.
0
0.0.0.
6
0
.0.0.6
1
.0.0.6
A0-01
50.00
A0-00
ESC
▲
>>
▲
ENT
ESC
Escape modification
