GSK 218M, Connection And Plc Manual

Page: 214 / 227

GSK218M CNC System Connection and PLC Manual
211
Alarm information: 1237 the tool magazine needs to return to zero because its origin is lost.
Fault cause:
Troubleshooting:
Alarm information: 1238 the infeed in-position check is abnormal
Fault cause: Reversed
Troubleshooting: Reversed
Alarm information: 1239 the retraction in-position check is abnormal.
Fault cause: Reversed
Troubleshooting: Reversed
Alarm information: 1240 the tool magazine needs to return the zero again because it is abnormal.
Fault cause: 1. the tool magazine stops the rotation in the time set by T102, the system has
checked that the tool magazine count switch9X5.3) abnormally creates the pulse
signal.
2. when the tool magazine rotates, the system checks that the tool magazine count
switch 0 or 1 exceeds the time set by T103.
Troubleshooting: 1. the tool magazine CCW or CW output (Y3.0 Y3.1) is abnormal.
2. the tool magazine count switch is abnormal.
3. set T102 T103 value again.
Alarm information: 1241 the tool magazine infeed check is abnormal
Fault cause: when the tool magazine executes the infeed(i.e. Y3.2=1), the tool magazine infeed
check switch (X5.1) has no operation.
Troubleshooting: 1. check whether the tool magazine infeed check switch is normal.
Alarm information: 1242 the tool magazine retraction check is abnormal
Fault cause: the tool magazine executes the retraction in the time set by T105, the tool magazine
infeed check switch (X5.2) has no operation.
Troubleshooting: 1. check whether the tool magazine infeed check switch is normal.
2. check whether Y3.3 outputs.
3. regulate again T105 time
Alarm information: 1243 the tool magazine zero setting is enabled.
Fault cause: when the tool magazine has no zero return switch(i.e. K0101=0), and K0106=1, the
system alarms and prompts the tool magazine zero setting is enabled.