GSK 218M, Connection And Plc Manual

Page: 220 / 227

GSK218M CNC System Connection and PLC Manual
217
C100 Tool magazine capacity setting 16
C101 Automatic lubricating OFFtime setting 30
C102 Automatic lubricating ON time setting 30
Notes:
1. CTR100 setting value must be less than 100 and must be the same that of D100, otherwise
there may be the abnormal.
For example: CTR100 =16, the total tool magazine number is 16.
CTR100=24, the total tool magazine number is 24.
2. C101 unit is related to T0016.
For example: T0016 is set to 60000, C101 unit is 1m, and C101 is set to 30, the lubricating OFF
time is 30ms(minutes).
3. C102 unit is related to T0017
For example: T0017 is set to 1000, C102 unit is 1s, and C102 is set to 10, the lubricating OFF
time is 10s.
Table 8 M code definition
M code F signal Function Remark
M00 F0317 Program pause
M01 F0304 Selection stop
M02 F0305 End of program
M03 F0300 Spindle CCW
M04 F0301 Spindle CW
M05 F0302 Spindle stop
M06 F0303 Automatic tool change
M08 F0310 Cooling ON
M09 F0311 Cooling OFF
M10 F0312 A axis clamp Reversed
M11 F0313 A axis release Reversed
M16 F0260 Spindle release instruction Reversed
M17 F0261 Spindle clamp instruction Reversed
M18 F-001 Cancel the spindle exact stop
M19 F0262 Spindle exact stop
M21 F0263 Search tool instruction when retraction
M22 F0264 Search tool instruction when startup the
current tool
M23 F0265 Tool magazine forward
M24 F0266 Tool magazine backward
M26 F-001 Start chip removal lift conveyor
M27 F-001 Close chip removal lift conveyor