GSK 218M, Connection And Plc Manual

Page: 156 / 227

GSK218M CNC System Connection and PLC Manual
153
OPERATION ： operation state of ladder 。
N0.
：
counter number, cannot be changed.
ADDRESS ： counter address, cannot be changed.
CURRENT
：
counter current value, cannot be changed.
SET ： counter preset value, can be changed during MDI mode.
Data/serial number: displaying input data. The serial number appears by pressing
<
SEARCH
> on the panel to search the data. The CNC returns to
the data displaying interface after press <CANCEL>.
MDI mode: current operation mode.
【
Esc
】 ：
return to the up menu.
Press <
CHANGE
> to download the setting value to operation the CNC. When the change is
completed, the system displays: CTR Downloaded OK ! , when the change is not completed,
the system displays: Can’t download !
(Note: press
【
CHANGE
】
after modification to save the modification and operation the CNC.
Press the Page Up/Page Down, four Direction keys to search and position, view or modify the
counter address.
3.3 Data list
Press
【
DATA
】
during Fig. 3-1 to enter the view and the setting interface of counter as Fig. 3-3-1.
N0. ADDRESS DAT A N0. ADDRESS DAT A
000 D000 00000 012 D012 00000
001 D001 00000 013 D013 00000
002 D002 00000 014 D014 00000
003 D003 00000 015 D015 00000
004 D004 00000 016 D016 00000
005 D005 00000 017 D017 00000
006 D006 00000 018 D018 00000
007 D007 00000 019 D019 00000
008 D008 00000 020 D020 00000
009 D009 00000 021 D021 00000
010 D010 00000 022 D022 00000
011 D011 00000 023 D023 00000
PLCPara
MDI
RUN
【CTR】 【TMR】 【DATA】
【返回】 【KPAR】
Fig. 3- 3- 1
Contents and operations on data list interface:
OPERATION
：
operation state of ladder.