GSK 218M, Connection And Plc Manual

Page: 111 / 227

GSK218M CNC System Connection and PLC Manual
108
［ Output conditions ］ For the output conditions and procedure, see Basic Procedure.
Note: Binary T00
～
T31 outputs to T code.
For example, T corresponds to 00000000, 00000000, 00000000, 00000011.
Miscellaneous function completion signal
FIN
（
G000
＃
0
）
［
Classfication
］
Input signal
［
Function
］
The signal reports the completion of miscellaneous function, spindle
speed function and tool function.
［
Operation
］
When the signal becomes 1, for the control unit operation and
procedure, see Basic Procedure.
Warning
Only one end signal is used for all functions above. The end signal must go “1”
after all function are completed.
Distribution end signal
DEN
（
F001
＃
3
）
［ Classfication ］ Output signal
［
Function
］
The signal reports that all instructions are completed except those
miscellaneous functions, spindle speed function, tool functions are
contained during the same block and have been tramsmitted to PLC.
They also report that the end signal from the PLC is being waited.
［
Output conditions
］
DEN signal is 1 with the following conditions:
Waiting for the completion of miscellaneous functions, spindle
speed functions, tool functions and all other instructions during
the same block are completed.
DEN signal is 0 when:
The execution of one block is completed.
Signal address
FIN
G000
＃
7
＃
6
＃
5
＃
4
＃
3
＃
2
＃
1
＃
0
DEN
F001
TF SF MF
F007
DM00 DM01 DM02 DM30
F009
M07 M06 M05 M04 M03 M02 M01 M00
F030
M15 M14 M13 M12 M11 M10 M09 M08
F031
M23 M22 M21 M20 M19 M18 M17 M16
F032